Pumps & Solenoid Valves

In this range we stock, Anti-Theft 12 Volt Solenoid Valves, Petrol Pump Contact Assembly, 12 Volt Diaphragm Pressure Fuel Pump, 12 and 24 Volt Self Priming Transfer Pumps.

!
Durite
0-129-12
0-129-12

Anti-Theft 12 Volt Solenoid Valve

Anti-theft 12 volt solenoid valve for petrol and diesel, cuts off fuel when not energised. Bore of 3.5mm, pressure 0-3 bar, flow coefficient of 0.28. 8mm OD. Protected to IP65.

Durite
0-296-00
0-296-00

Petrol Pump Contact Assembly - Single Contact

Petrol pump contact assembly - single contact. SU SR1438.

Durite
0-673-00
0-673-00

Petrol Pump Contact Assembly - Dual Contact

Petrol pump contact assembly - dual contact. SU AUA / 6021.

Durite
0-673-12
0-673-12

12 Volt Diaphragm Pressure Fuel Pump

12 volt diaphragm pressure fuel pump, electronically switched. 125 litres per hour. Pressure 0.30 bar. Suction -0.10 bar. Not suitable for bio-diesel. ECE approved.

Durite
0-673-13
0-673-13

12 Volt Self-Priming Transfer Pump for Corrosive Liquids

12 volt self-priming transfer pump for corrosive liquids. PTFE gear element, stainless steel AISI316 body and shaft with Fluoroelastomer lip seals. 14mm pipes and a stainless steel inlet filter. Flow rate up to 14 litres/min. Self-priming from 1.5 metres with a maximum head of 20 metres.

Durite
0-673-63
0-673-63

Self-Priming Transfer Pump for Non-Flammable Liquids

12 volt self-priming transfer pump for non-flammable liquids. Bronze gear element and brass body. Stainless steel shaft with 14mm pipes and a stainless steel inlet filter. It has a flow rate up to 14 litres/min and pressure up to 2 bar. Self-priming from 1.5 metres with a maximum head of 20 metres.

Durite
0-673-65
0-673-65

Self-Priming Transfer Pump for Lubricating Oils

12 volt self-priming up to 1.5 metre transfer pump for lubricating oils. Bronze gear element and brass body. Stainless steel shaft with 6mm and 8mm flexible suction pipes, flow rate from 20 to 60 litres/hr. Ideal for removing oil from marine and plant engines where the sump is inaccessible.

Durite
0-673-75

Self-Priming Transfer Pump for Non-Flammable Liquids

24 volt self-priming transfer pump for non-flammable liquids. Bronze gear element and brass body. Stainless steel shaft with 14mm pipes and a stainless steel inlet filter. It has a flow rate up to 14 litres/min and pressure up to 2 bar. Self-priming from 1.5 metres with a maximum head of 20 metres.

Durite
0-673-77
0-673-77

Self-Priming Transfer Pump for Lubricating Oils

24 volt self-priming up to 1.5 metre transfer pump for lubricating oils. Bronze gear element and brass body. Stainless steel shaft with 6mm and 8mm flexible suction pipes, flow rate from 20 to 60 litres/hr. Ideal for removing oil from marine and plant engines where the sump is inaccessible.