Relay and Sockets

In this range we stock, Interior Light Delay, Emergency Braking Stop Light Unit, Bulkhead Socket for Micro Relays, Controllers and Flasher Units and Universal Flying Socket for Flasher Units.

!
Durite
0-743-12

Interior Light Delay

Interior light delay, 12 volt. Four terminal connections. Gives 10 second delay to interior lights, universal application. 

(1 = door switch, 2 = + feed, 3 = - earth, 5 = - side of lamp) Card 1

Durite
0-743-62

12 Volt Emergency Braking Stop Light Unit

Emergency braking stop light unit, 12 volt. Flashes the vehicle stop lights under emergency braking. The microprocessor control unit, triggered by the inertia switch at a deceleration of 6m/s2, flashes the vehicle stop lights at 3.5 flashes per second for up to 12 seconds, warning following vehicles of emergency braking. After 12 seconds, or when emergency braking ceases, the brake lights revert to normal operation. ECE approved. Box 1

Durite
0-729-03

Bulkhead Socket for Micro Relays

Bulkhead socket for micro relays. Accepts up to 2 x 2.8mm 3 x 4.8mm and 2 x 6.3mm terminals. Can be gang mounted. Supplied with locking terminals. Card 1

Durite
0-729-02

Universal Flying Socket for Flasher Units and Relays

Universal flying socket for flasher units and relays. Accepts up to 5 x 6.3mm terminals. Supplied with locking terminals. Card 1

Durite
0-729-01

Bulkhead Socket for Controllers, Flasher Units and Relays

Bulkhead socket for controllers, flasher units and relays. Accepts up to 4 x 2.8mm, 3 x 6.3mm and 2 x 9.5m terminals. Can be gang mounted. Supplied with locking terminals. Card 1

Durite
0-729-00

Bulkhead Socket for Flasher Units and Relays

Bulkhead socket for flasher units and relays. Accepts up to 4 x 2.8mm and 5 x 6.3mm terminals. Can be gang mounted. Supplied with locking terminals. Card 1